Dry Ice Blasting with Cold Jet
[Web Information Archive - circa 2004]

Go To CURRENT COLD JET WEBSITE

 

Home

About Cold Jet

Dry Ice Blasting

Industries

Products

Services

Technical

FAQ

Testimonials

References

Contact Us

Sitemap

 

RADIAL FEED SERIES

ACCESSORIES


MACHINE-MOUNTED (EXTERNAL) COALESCING AIR FILTER (CAF)

Dry Ice Blasting Machine-Mounted Coalescing Air Filter

- Part #: 2M0020-G3

  • Externally mounted.
  • Designed to remove large amounts of water, oil, rust, or other particles from the air supply.
  • Optional pressure regulator available to precisely control the incoming air pressure.

INTERNAL LOW WORKING PRESSURE AIR PRESSURE REGULATOR
(for AeRO 75)

- Part #: 2I0100-G2

  • Internally mounted (AeRO 75 only).
  • Designed to remove large amounts of water, oil, rust, or other particles from the air supply.
  • Optional pressure regulator available to precisely control the incoming air pressure.

LOW WORKING PRESSURE AIR PRESSURE REGULATOR

Low Working Air Pressure Regulator for Dry Ice Blasting Systems

- Part #: 2M0020-G1

  • Externally mounted - can be mounted at the plant’s air drop, on a stand alone or machine mounted CAF, or on an air inlet to the Cold Jet Radial Series and Venturi Series dry ice blasting units.

HIGH WORKING PRESSURE AIR PRESSURE REGULATOR

High Working Air Pressure Regulator for Dry Ice Blasting Systems

- Part #: 2M0020-G2

  • Externally mounted - can be mounted at the plant’s air drop, on a stand alone or machine mounted CAF, or on an air inlet to the Cold Jet Radial Series and Venturi Series dry ice blasting units.

 

JIC MODULAR END FITTINGS

JIC end fittings for Dry Ice Blasting Hoses

- 1" (2.54 cm) JIC, part #:  2N0060
- 0.75" (1.9 cm) JIC, part #:  2N0064

  • Allows nozzle base, extension tubes, or a rotary union to be connected directly to the dry ice blast hose.
  • Aluminum.

ALPHA SERIES 0.75" (1.9 cm) BASE COUPLER

Dry Ice Blasting Nozzle Base/Applicator Coupler

- Part #: 3E0729

  • Allows the Micro-Series (MS) type nozzles to be used with the CB2000 Applicator or other nozzle base.
  • Aluminum.

 

NOZZLE BASE

- Part #: 2E0233

  • Provides for the extension of any Radial Feed Series nozzle in a 180° orientation beyond the exit of the blast applicator.
  • The patented 180° base turns blast flow 180° while maintaining pellet integrity and blast aggression.
  • Ideal for cleaning confined spaces.

 

QUICK CHANGE MODULE

Quick Change Module for Dry Ice Blasting Nozzles

- Part #: 2E0290

  • Enables quick and safe nozzle changes.
  • Can be used with all of Cold Jet’s dry ice blasting nozzles with appropriate coupler and end fittings.

 

PRECISION ROTARY UNION

Precision Rotary Union for Dry Ice Blasting Nozzles/Hoses

- Part #: 2N0073

  • Allows full rotation when a nozzle is attached to a dry ice blast hose or extension tube.
  • Stainless Steel.

 

3/4" (1.9 cm) JIC ROTARY UNION

- Part #: 2N0163

  • Allows full rotation when a nozzle is attached to a blast hose, extension tube, or appropriate nozzle extension.
  • 3/4" (1.9 cm) JICF to 3/4" (1.9 cm) JICM.
  • Lightweight.
  • Hard coat anodized aluminum.

FLANGE STYLE 1" (2.54 cm) OD NOZZLE EXTENSION TUBE

Dry Ice Blasting Nozzle Extension

- Flange, part #: 2E0312 - length
- Flange with coupler, part #: 2E0226 - length

  • Used for extending nozzle-base assemblies with minimum pressure loss.
  • Can be used with all available nozzles.
  • Available in 2" (5.08 cm), 10" (25.4 cm), 20" (50.8 cm) or 30" (76.2 cm) lengths.
  • Stainless Steel.

0.75" (1.9 cm) OD NOZZLE EXTENSION TUBE

Dry Ice Blasting Nozzle Extension Tube

- Straight tube, part #: 3E0715 - length
- JICM fitting, part #: 12HTX-S

  • Used for extending Micro-Series (MS) type nozzles directly from dry ice blasting applicator or nozzle-base.
  • Available in 5" (12.7 cm), 10" (25.4 cm), 15" (38.1 cm) or 20" (50.8 cm) lengths.
  • Stainless Steel.

1" (2.54 cm) OD NOZZLE BENT ENTRY TUBE

Dry Ice Blasting Nozzle Bent Entry Tube

- Part #: 2E0227

  • Used for turning nozzle-base assemblies with minimum pressure loss.
  • Can be used with all nozzles.
  • Standard turning angle is 80°, but other angles available through special order.
  • Stainless Steel.

1" (2.54 cm) OD NOZZLE BENT ENTRY TUBE WITH EXTENSION

Dry Ice Blasting Nozzle Bent Entry Tube with Extension

- Part #: 2E0259

  • Used for turning nozzle-base assemblies with minimum pressure loss.
  • Can be used with all nozzles.
  • Turning angle of 80° with an 11" (27.94 cm) linear extension after turn.
  • Stainless Steel.

 

FLOW DIVIDER

Dry Ice Blasting Hose Flow Divider

- 1.25" (3.18 cm) hose to two 1" (2.54 cm) hoses, part #: 2E0320
- 1.5" (3.81 cm) hose to two 1.25" (3.18 cm) hoses, part #: 2E0319
- Dual trigger interconnect box, part #: 2G1157

  • Splits one dry ice blast hose into two dry ice blast hoses for simultaneous blasting.
  • The unique flow path contour allows the dry ice pellets to separate into two paths while maintaining pellet integrity.
  • A dual trigger interconnect box is required.

ALPHA SERIES 0.5" (1.27 cm) TO 1" (2.54 cm) ADAPTER

Dry Ice Blasting Nozzle Adapter

- Part #: 2E0295

  • Permits all nozzles to be used with the flange style 1" (2.54 cm) OD nozzle extension tube.
  • Allows the 1" (2.54 cm) OD nozzle extension tube to be used with a CB2000 Applicator.
  • Aluminum.

NOZZLE CASE

- Part #: 3E0773C

  • Protect and store nozzles in this mobile rugged plastic case.
  • Holds up to 11 nozzles and accompanying accessories.
  • Wheels on one end for easy transporting.
  • Nozzles shown are not included in price - sold separately.

 

ADJUSTABLE TUBE HANDLE

Adjustable Dry Ice Blasting Extension Tube Handle

- For 0.75" (1.9 cm) OD tubes, part #: 2E0275
- For 1" (2.54 cm) OD tubes, part #: 2E0209
- For 1 3/16" (3.02 cm) OD tubes, part #: 2E0289

  • Slides easily and rotates around the extension tubes for optimal comfort and control.
  • Fully adjustable. Loosen and lock by rotating the handle.
  • Allows for a horizontal or vertical orientation.

THREADED NOZZLE HANDLE

Threaded Dry Ice Blasting Nozzle Handle

- Part #: 2E0245

  • Improves ergonomics.
  • Threads into the 307 BL nozzle.

 

ADJUSTABLE CLAMP STYLE NOZZLE HANDLE

Adjustable Clamp Style Dry Ice Blasting Nozzle Handle

- Part #: 2E0287

  • This handle slides along grooves milled into the edges of the rectilinear nozzle.
  • Designed to work with the 218 SL nozzle.

Back to catalog index >>

 

© 2004 Copyright Cold Jet LLC